The HVAC diffusers shall be customized according to the opening size. In order to facilitate installation, the actual inner diameter (length and width) of the HVAC diffusers will be slightly less than the net opening size by 0.5-1.0 cm.

Louver HVAC diffusers are widely used as air supply outlets in air conditioning systems. According to the use requirements, aluminum air volume regulating valves (miter gates) can be equipped behind the HVAC diffusers. Double-layer louver HVAC diffusers have two layers of mutually perpendicular sheets to adjust the angle of horizontal and vertical blades, and adjust the airflow diffusion surface to change the range. The outer frame width of the HVAC diffusers has two kinds of wide frames and narrow frames. Double-layer louver HVAC diffusers can be used by manufacturers in ventilation systems with special requirements. The double-layer louver HVAC diffusers have two layers of movable blades with adjustable angles, and the short blades are used to adjust the diffusion angle of the supply airflow and also to change the direction of the airflow; The adjustment of long blades can make the air supply flow stick to the ceiling or incline downward at a certain angle (when supplying warm air). The outer blade of the double-layer louver vent or the blade of a single-layer louver vent can be parallel to the long side or the short side, which can be selected according to customer requirements.

Aluminum alloy HVAC diffusers: easy to condense, relatively low price.

Installation is also a very important part of the air conditioner's air outlet. Generally speaking, the air outlet should be installed in advance, that is, it should be installed before the cover is painted. In this way, even if the wall is not damaged, there must be a certain gap between the shutter and the wall. After the air outlet is installed and painted, the gap inside can be filled, so that it can be done.

Precautions for installation of air conditioner vent

1. Do not set the lamp slot at the air outlet of the air conditioner. It is easy to block the hot air from reaching the personnel activity area, affecting the heating effect.

2. According to experience and test data, when heating in winter, the horizontal shutter is adjusted to 45 degrees, which is a suitable angle. If it is too high or too low, the heating effect may be affected.

3. The air outlet of the air conditioner is large and easy to accumulates dirt, which affects the air outlet temperature and beauty of the air conditioner. Users should clean the air outlet regularly to keep it clean and ventilated.

The air conditioning outlet is simply the terminal equipment used for air supply and returns in the central air conditioning system, which is air distribution equipment. The air supply outlet sends the cooled or heated air to the room, while the air return outlet absorbs the indoor dirty air, forming a whole air cycle, which ensures the cooling and comfort of indoor air while ensuring the indoor cooling and heating effect.

Air conditioning outlets are mainly divided into air return outlets, air supply outlets, inspection ports, and external wall outlets.

Used in heating and cooling air conditioning systems, can be installed on the side wall or ceiling.

The vertical louver-type air outlet has a positive-pressure air conditioning room for automatic exhaust. Normally, the louver at the air outlet will naturally sag by its own weight to isolate the indoor and outdoor air exchange. When the indoor air pressure is greater than the outdoor air pressure, the airflow will blow the louver open and exhaust outwards. Conversely, when the indoor air pressure is less than the outdoor air pressure, the airflow cannot reverse into the room, and the air outlet has a one-way check function.

Production process: It is generally used for the air return outlet, which is often used with the filter screen as the air return outlet. It can also be equipped with a multi-leaf split control valve to control the air volume. The angle of the shutter can be adjusted at any angle from 0 to 90 °. It can be divided into two types: FK-2 and FK-20. The difference is that the dimensions of the outer frame and blade are different. The FK-2 type has a wide frame and a wide blade, and the others are the same. FK-2a type or FK-20a type movable core single-layer shutter vent is movable core type, which is convenient for cleaning the filter screen and can also be used as an access door. It has a beautiful appearance and is convenient for maintenance

The special-shaped louver vent is a kind of air distributor. In air conditioning engineering, various types of air supply outlets and return outlets (or exhaust outlets) are generally referred to as air distributors. Common louver HVAC diffusers include single-layer louver HVAC diffusers, double-layer louver HVAC diffusers, side wall grille HVAC diffusers, and slot grille HVAC diffusers.

Single-layer louver HVAC diffusers are often used for return HVAC diffusers, sometimes with an aluminum alloy mesh filter or nylon filter screen. The double-layer louver HVAC diffusers are composed of double-layer blades. The front layer of the blades is adjustable, and the back layer of the blades is fixed. The opposite multi-blade air volume regulating valve can be configured as required to regulate the air volume of the HVAC diffusers.

The shell of the aluminum alloy air supply outlet is made of a high-quality cold-rolled steel plate, with electrostatic spraying on the surface, including a static pressure box, filter, and diffuser. In the reconstruction and new construction of clean rooms at all levels, it can be used as a terminal filter device in clean ceilings and other places. It has the advantages of less investment and simple construction. Product properties Aluminum alloy air supply outlet application: 1. Clean room with aluminum alloy keel structure 2. A clean room with a compact design must be used because its height is limited by the height of civil engineering. Aluminum alloy air supply outlet characteristics of some local purification equipment The aluminum alloy air supply outlet has an adherent (horizontal) airflow, and its structure is a multi-layer cone. As the indoor-induced air flow is greater than the exhaust air volume, the blowing air flow decelerates rapidly. Therefore, relatively large air volume can be supplied for any size area and the size of the diffusion radius changes within the given air volume range.

1. Clean rooms with various cleanliness levels and maintenance structures.

2. HVAC diffusers material: carbon steel, stainless steel, aluminum plate, and plastic;

3. It is used for the roof air supply of non-uniform clean rooms. The aluminum alloy HVAC diffusers are of all aluminum alloy structure with secondary oxidation coating. It is made of the stainless steel plate and galvanized steel plate to prevent rain and fire under any weather conditions. It can be assembled into large-scale louvers to achieve large airflow and good noise elimination characteristics. The movable blades are sandwich-type, and the interlayer is inlaid with noise elimination materials.